WhatsApp +86 183 6958 5730 | [email protected] | 300 m² per colour  ·  15–20 days after deposit  ·  FOB Qingdao / Lianyungang, China
Linyi Yunqianyang Decoration Materials Co., Ltd. YQY AcousticAcoustic Panel Factory
Straight slat acoustic panel 600×2400×11 mm
DT-2

Straight Slat Acoustic Panel

Flat slatted panel, 600 × 2400 mm, five build thicknesses from 9 mm to 21 mm. MDF slats on high-density polyester fibre felt, B1 fire rating and E0 emission.

Price on project basis Price is quoted per project. Send quantity, thickness and destination port for an FOB offer.

Choose the build

  • Selected modelDT-2
  • Panel size600 × 2400 × 11 mm
  • Polyester fibre felt5 mm polyester fibre, 800 g/m²
  • NRC (sample average)0.75–0.80
  • Fire rating / emissionB1 / E0
  • SurfaceTechnical wood veneer T001–T009, or PVC film
  • Edge / wrapSingle wrap or triple wrap
  • Minimum order300 m² per colour

Jump to this build's full specification →

Five builds

Which thickness for your project

The slat face is identical across all five. What changes is how much polyester fibre sits behind it — and that is what determines how much sound the panel absorbs.

Straight Slat Acoustic Panel 9 mm (DT-1)
DT-1 · 9 mm

Straight Slat Acoustic Panel 9 mm (DT-1)

The slimmest panel in the range. 9 mm total thickness keeps the finished wall under 15 mm, for renovation projects where floor area and door clearance cannot be lost.

Panel size600 × 2400 × 9 mm
Total thickness9 mm
Polyester fibre felt3 mm polyester fibre, 500 g/m²
MDF backing6 mm MDF, 750 g/m²
NRC (sample average)0.75–0.80
Fire ratingB1
Formaldehyde emissionE0

Straight Slat Acoustic Panel 11 mm (DT-2)
DT-2 · 11 mm

Straight Slat Acoustic Panel 11 mm (DT-2)

Our best-selling thickness. 11 mm balances absorption, rigidity and freight cost, and is the panel most West African distributors stock as a standard line.

Panel size600 × 2400 × 11 mm
Total thickness11 mm
Polyester fibre felt5 mm polyester fibre, 800 g/m²
MDF backing6 mm MDF, 750 g/m²
NRC (sample average)0.75–0.80
Fire ratingB1
Formaldehyde emissionE0

Straight Slat Acoustic Panel 16 mm (DT-3)
DT-3 · 16 mm

Straight Slat Acoustic Panel 16 mm (DT-3)

16 mm with a 7 mm felt core. The extra fibre mass lifts absorption in the 500–2000 Hz speech band, which is where intelligibility problems start.

Panel size600 × 2400 × 16 mm
Total thickness16 mm
Polyester fibre felt7 mm polyester fibre, 1000 g/m²
MDF backing6 mm MDF, 750 g/m²
NRC (sample average)0.80–0.85
Fire ratingB1
Formaldehyde emissionE0

Straight Slat Acoustic Panel 18 mm (DT-4)
DT-4 · 18 mm

Straight Slat Acoustic Panel 18 mm (DT-4)

18 mm high-density build for large wall areas. The heavier felt core resists panel drumming on wide stud spacing.

Panel size600 × 2400 × 18 mm
Total thickness18 mm
Polyester fibre feltPolyester fibre, 1350 g/m²
MDF backing6 mm MDF, 750 g/m²
NRC (sample average)0.80–0.85
Fire ratingB1
Formaldehyde emissionE0

Straight Slat Acoustic Panel 21 mm (DT-5)
DT-5 · 21 mm

Straight Slat Acoustic Panel 21 mm (DT-5)

The full 21 mm build — the same construction as our shaped panels, so straight and 3D panels can be mixed on one wall without a visible step.

Panel size600 × 2400 × 21 mm
Total thickness21 mm
Polyester fibre feltPolyester fibre, 1350 g/m²
MDF backing6 mm MDF, 750 g/m²
NRC (sample average)0.80–0.85
Fire ratingB1
Formaldehyde emissionE0

Face and wrap

What the slat face is actually wrapped in

Two surfaces, and two ways of closing the edge. Photographed on the sample bench, not rendered.

Black oak veneer sample, single wrap
Black oak veneer sample, single wrap
Smoked oak veneer sample
Smoked oak veneer sample
Grey oak veneer sample
Grey oak veneer sample
Triple wrap sample seen from the short end
Triple wrap sample seen from the short end
White oak veneer sample
White oak veneer sample
Sample label on the back of a veneer board
Sample label on the back of a veneer board
Three tones of veneer held in one hand
Three tones of veneer held in one hand
White oak board, spec label stuck to the face
White oak board, spec label stuck to the face
Red-brown end of the veneer range
Red-brown end of the veneer range
The pale end: three light boards side by side
The pale end: three light boards side by side

Single wrap

The veneer or film covers the slat face and the two long edges; the short end shows the black felt core. This is the build most interior walls are ordered in, because panels butt together and the ends sit in a corner or under a trim.

Triple wrap

Face plus both long edges plus the two short ends are wrapped. Use it where an end of the panel is exposed — a return wall, a column face, a reception desk front — or where panels are installed with an open shadow gap.

Technical wood veneer is a laminated veneer sheet, so grain repeats across panels; the nine numbered faces T001–T009 are what we hold in the sample room. PVC film adds stone and metal effects on the same card. Both are laminated on the same line, to the same MDF board.

Panel joint detail with hidden clip
Construction

Hidden clip joint, no visible fixings

Panels butt-joint edge to edge. The slat pattern is continuous across the joint, and the fixing sits in the gap between slats, so the finished wall shows no screws and no shadow gaps.

  • Install on a flat substrate: gypsum board, plywood, MDF or a levelled masonry wall
  • Minimum substrate flatness 2 mm over 2 m — check with a straight edge before starting
  • Two workers fix 40–60 m² per day on a prepared wall
  • Cut with a fine-tooth circular saw; cut edges are covered by the matching edge trim
Full installation guide →
In the stack

The same slat, three different builds on our bench

9 mm build: light oak, stacked
9 mm build: light oak, stacked
16 mm build: three colours against the wall
16 mm build: three colours against the wall
18 mm build: dark grain, three samples
18 mm build: dark grain, three samples
Veneer face and groove, shot close enough to see the grain
Veneer face and groove, shot close enough to see the grain
Applications

Where the straight panel is the right choice

Office and meeting rooms

11 mm on corridor walls, 16 mm and above on the wall behind the speaker. The aim is speech clarity, not silence.

Hotel guest corridors

9–11 mm keeps the wall thin and the fire rating intact. The slat pattern hides scuff marks better than a flat painted wall.

Schools and classrooms

16–18 mm on rear and side walls. Some reverberation is needed in a teaching room — do not cover all four walls.

Retail and showrooms

A decorative wall that also fixes the loud-room problem caused by hard floors and glass frontage.

Order a sample of the build you are considering

Tell us the thickness and the finish family. We cut an A4 sample from the actual production panel, not from a colour chart.

Chat on WhatsApp