Linyi Yunqianyang Decoration Materials Co., Ltd.
We are a manufacturer, not a trading company. Everything on this site is made in our own plant in Lanshan District, Linyi — the board and laminate cluster of Shandong Province.

A 5,000 m² floor, 15 lamination lines, packing in the same building
Our site covers 5,000 m² in Yitang Town. Lamination, CNC cutting, edge finishing and packing all happen in the same building, which is why a colour complaint can be investigated on the line rather than argued about by email.
| Established | 2014 (12 years) |
|---|---|
| Plant area | 5,000 m² |
| Lamination lines | 15 |
| MDF cutting lines | 3 |
| Pinning stations | 8 |
| Packing teams | 3 |
| Dust cleaning teams | 2 |
| Location | Dongshan Village, Yitang Town, Lanshan District, Linyi, Shandong, China |
| Main export markets | Nigeria, Ghana, Côte d'Ivoire, Senegal, Cameroon, Benin, Togo, Guinea |
| Loading ports | Qingdao / Lianyungang, China |
Four operations, one roof
Being a real factory matters for one practical reason: when something goes wrong, we can fix it. A trader cannot change a lamination temperature or re-cut a panel.









Lamination
Technical wood veneer or PVC film hot-pressed onto MDF across 15 lines, so a repeat order can be pressed to the same retained sample.
Cutting and shaping
3 MDF cutting lines for slat width and gap, plus our own CNC for the thirteen YX patterns.
Pinning and finishing
8 pinning stations bond the felt behind the slats and trim the four edges — the edge is on show once the panel is up.
Cleaning and packing
2 dust cleaning teams and 3 packing teams: 8–12 panels per carton, corner-protected and strapped, photographed before loading.
What happens to a panel, step by step
Seven stages, all in the same building in Yitang Town. If a colour is wrong or an edge is rough, it is visible before the carton is closed rather than after the container is opened.
Veneer or film goes on the board
The face is hot-pressed onto the MDF on one of our 15 lamination lines. This is where a colour is set, and where a re-run has to start if a batch is wrong.
The board is sawn into slats
Slat width and the gap between slats are cut to the drawing on one of 3 MDF cutting lines. The gap is what lets sound past the face, so it is a specification, not a decorative choice.
Shaped patterns are routed
The thirteen YX patterns — hexagon, wave, brick, diamond and the rest — are cut on our own CNC from the same board, which is why a shaped module can carry the same colour as a flat panel.
Felt is bonded behind the face
Polyester fibre felt at 750 g/m² on straight panels, 900–1000 g/m² on the flexible builds, is glued to the back of the slat layer. This is the layer that actually absorbs.
Pinning and edge finishing
8 pinning stations assemble the layers and trim the edges. A panel leaves here with four clean edges, because the edge is visible once it is on the wall.
Dust cleaning
2 cleaning teams go over the slat gaps. Felt dust in a gap ends up on a client's floor, and it is the fastest way to lose a repeat order.
Packing and loading
3 packing teams carton and strap the panels, 8–12 pieces per carton, corner-protected. We photograph the pallets before loading so that a damage claim starts from evidence.

What we check, and what we do not promise
- Every batch: thickness and dimension against tolerance, felt density, colour against the retained reference sample
- Every order: the retained colour sample is kept as a reference, so a repeat order is compared to a panel, not to a photograph
- Before loading: photographs of the packed pallets sent to you for approval
- We do not promise a colour match against a screen, or a zero-defect shipment. We promise to replace defective panels, and we put that in the contract.
Ask for the packing photographs on any trial order. It tells you more about a supplier than a brochure does. Fire and emission documentation: tell us the standard your tender names and we will send what exists for that model — we will not send a certificate number we have not received.
Factory direct, without the theatre
You are buying from the line
No trading layer between your order and the machine that makes it. That is a price advantage, and it is also who you call when a panel is wrong.
Packing is a department here
3 packing teams and 2 cleaning teams. Most damage and most complaints are made in the last two metres of the process, not on the machine.
B1 and E0, stated honestly
The panel build is made to B1 (GB 8624) and E0 (GB 18580). If your market needs a local test on top of that, we will say so before you write it into a tender.
One colour card, whole range
Straight, flexible and shaped panels in the same finish — critical when a curved column sits in front of a flat wall.
Want to see the plant before you order?
We host factory visits and live video walkthroughs of the line. Tell us a time and we will show you the lamination line, the CNC shop and the packing area.