WhatsApp +86 183 6958 5730 | [email protected] | 300 m² per colour  ·  15–20 days after deposit  ·  FOB Qingdao / Lianyungang, China
Linyi Yunqianyang Decoration Materials Co., Ltd. YQY AcousticAcoustic Panel Factory
Slatted acoustic panel wall
Factory direct · Linyi, China · Shipping to West Africa

Polyester Fibre + MDF Acoustic Panels for Offices, Hotels and Halls

Straight slat, bendable and 3D shaped panels, 9–21 mm, fire rating B1 and formaldehyde emission E0. They come off our own lamination lines in Yitang Town, Linyi — 15 lamination lines, 3 MDF cutting lines, 8 pinning stations — and ship FOB Qingdao or Lianyungang with no trading layer in between.

12 yearsManufacturing acoustic panels
5,000 m²Own plant, 15 lamination lines
19 models5 thicknesses + 13 shaped patterns
300 m² per colourLead time 15–20 days
Product range

Three families, one construction

Every panel is the same sandwich: a CNC-machined MDF slat or pattern bonded to a high-density polyester fibre felt core. What changes is the shape and the total thickness.

Cross-section of a straight slat panel: MDF slats laminated onto high-density polyester fibre felt
Cross-section of a straight slat panel: MDF slats laminated onto high-density polyester fibre felt
A finished slat panel held in the workshop: MDF face slats, black felt core, wrapped edge
A finished slat panel held in the workshop: MDF face slats, black felt core, wrapped edge
How it works

Absorption comes from the felt, not from the wood

The MDF slats give you the look and the rigidity — 750 g/m² board from our own cutting lines, laminated in single-wrap or triple-wrap edges. The sound absorption comes from the black polyester fibre felt behind them: a porous, open-cell layer that converts sound energy into a small amount of heat as air moves through it. Felt density runs from 500 g/m² on the 9 mm build to 1,350 g/m² on the 21 mm builds.

The felt also does something practical: it hides the substrate. The gaps between slats stay dark and even, so the wall reads as a clean pattern rather than a dirty gap.

  • 9–11 mm for corridors, ceilings and tight renovation budgets
  • 16–18 mm for meeting rooms, classrooms and call centres — the speech band is where the difference is heard
  • 21 mm for studios, worship halls and any wall where the panel is the design feature
Materials and performance details →
Specification at a glance

Thickness, felt density and NRC

NRC figures below are the average of our own sample tests. They are quoted as a range because the result moves with the mounting method, the air gap behind the panel and the room. Treat them as design guidance, not as a project guarantee.

Panel buildPolyester fibre feltNRC (sample average)
9 mm (DT-1)3 mm / 500 g/m²0.75 – 0.80
11 mm (DT-2, WQ-1)5 mm / 800–900 g/m²0.75 – 0.80
16 mm (DT-3)7 mm / 1000 g/m²0.80 – 0.85
18 mm (DT-4)1350 g/m²0.80 – 0.85
21 mm (DT-5, YX series)1350 g/m²0.80 – 0.85

The NRC values above are averages from our own sample measurements, not a third-party laboratory report — we will not publish a report number we do not hold. Fire rating B1 and formaldehyde emission E0 apply to the full panel build, not to the veneer alone. Where your tender needs accredited test reports, tell us before the order and we confirm in writing which documents we can actually supply.

Best sellers

What most projects order first

If you are stocking a range for distribution, start with these three: one flat panel, one bendable panel and one shaped pattern.

Why buy from the plant

A factory, not a trading company

We laminate in-house

15 lamination lines, 3 MDF cutting lines and 8 pinning stations on one 5,000 m² floor in Yitang Town, Linyi — China's board and laminate cluster.

Acoustic plus decorative

One panel solves the echo problem and the finish problem. No separate acoustic contractor and no fabric-wrapped panels to justify.

B1 and E0 as standard

Fire rating B1 and formaldehyde emission E0 on every model, not as an upgrade. Certificates supplied with the shipping documents.

Packed by a dedicated team

3 packing teams and 2 dust-cleaning teams work behind the lamination lines: 8–12 panels per export carton, corner-protected, strapped to the pallet and labelled before the container is loaded.

Applications

Where these panels are specified

Six project types cover most of the enquiries we receive. Each one has a different acoustic problem and a different right answer.

Offices & Meeting Rooms

Offices & Meeting Rooms

Slatted walls cut speech reverberation in open plan and closed meeting rooms. 11 mm for corridors, 16 mm and above for boardrooms.

Hotels & Hospitality

Hotels & Hospitality

Lobbies, lift lobbies and guest corridors in 21 mm shaped panels, with flexible panels on columns and arches.

Schools & Lecture Halls

Schools & Lecture Halls

Classrooms need speech clarity more than silence. 16–18 mm panels on the rear and side walls reduce echo without deadening the room.

Studios & Home Theatres

Studios & Home Theatres

21 mm high-density panels for first-reflection points, with a 100 mm air gap behind for low-frequency control.

Restaurants & Retail

Restaurants & Retail

Decorative walls that also fix the 'loud room' problem in hard-surface restaurants and showrooms.

Worship Halls & Mosques

Worship Halls & Mosques

Large volume, hard surfaces and no soft furnishing — the hardest acoustic case. Full-height 21 mm panels and shaped qibla walls.

Wood and PVC finish series
Wood and PVC finish series
Wood and PVC finish series
Wood and PVC finish series
Colour and finish

One colour card, nine wood veneers

Two surface options on the same panel: technical wood veneer for a natural grain, or PVC film for tighter colour consistency and a lower price. Both are available across the straight, flexible and shaped ranges, so a curved column and a flat wall can be ordered in the same finish.

  • Technical wood veneer: oak, walnut, black oak, ash, teak
  • PVC film: wood grains, solid colours, metal and stone effects
  • Custom colour matching from 300 m² per colour
See the colour series →
Numbered wood veneers

The nine veneers we keep in the sample room

Every wood veneer we stock has a number, so a reorder six months later comes back in the same face. Ask for T004 and you get T004, not "dark oak".

T001 White Oak technical wood veneer sample
T001White Oak
T002 Walnut technical wood veneer sample
T002Walnut
T003 Walnut JK technical wood veneer sample
T003Walnut JK
T004 Smoked Oak technical wood veneer sample
T004Smoked Oak
T005 Grey Oak technical wood veneer sample
T005Grey Oak
T006 Black Oak technical wood veneer sample
T006Black Oak
T007 Grey Oak W. technical wood veneer sample
T007Grey Oak W.
T008 Teak technical wood veneer sample
T008Teak
T009 Brown Oak technical wood veneer sample
T009Brown Oak

T001–T009 are the technical wood veneers held as physical samples. The PVC film range adds stone and metal effects on the same card, so a wall of veneer and a wall of film can be ordered to read as one job.

Inside the plant

From board cutting to a labelled pallet

Photographs taken on our own floor in Yitang Town. No stock imagery and no borrowed project photos: what you see is the line your order runs on.

Automatic glue application before the slats are laid
Automatic glue application before the slats are laid
Slat panel coming off the lamination line
Slat panel coming off the lamination line
MDF board cut to width
MDF board cut to width
Pinning station: slats fixed onto the felt core
Pinning station: slats fixed onto the felt core
Wrapping and cartoning on the packing table
Wrapping and cartoning on the packing table
Labelled cartons ready for the container
Labelled cartons ready for the container
Raw board stored by colour batch
Raw board stored by colour batch
Finished panels in the loading bay
Finished panels in the loading bay

More about the factory →

Trade terms

How an order runs

Minimum order300 m² per colour
Lead time15–20 days after deposit
PaymentT/T 30% deposit + 70% against copy of B/L
Loading portQingdao / Lianyungang, China
PackingExport carton + pallet, 8–12 panels per carton, corner-protected and strapped
PricePrice is quoted per project. Send quantity, thickness and destination port for an FOB offer.

More questions about ordering →

Send your wall area and we will size the order

Tell us the project type, the wall area in square metres and the destination port. You get a panel recommendation and an FOB price the same working day.

Chat on WhatsApp